[1] A. Nechepurenko, S. Samuni, Oxidation protection of graphite by BN coatings, J. Solid State Chem. 154 (2000) 162-164.
http://doi.org/10.1006/jssc.2000.8829.
[2] P. Ritt, R. Sakidja, J.H. Perepezko, Mo–Si–B based coating for oxidation protection of SiC–C composites, Surf. Coat. Technol. 206 (2012) 4166-4172.
http://doi.org/10.1016/j.surfcoat.2012.04.016.
[3] X. Jin, X. Fan, C. Lu, T. Wang, Advances in oxidation and ablation resistance of high and ultra-high temperature ceramics modified or coated carbon/carbon composites, J. Eur. Ceram. 38 (2018) 1-28.
https://doi.org/10.1016/j.jeurceramsoc.2017.08.013.
[4] C.V. Kumar, B. Kandasubramanian, Advances in ablative composites of carbon based materials: A review, Ind. Eng. Chem. Res. 58 (2019) 22663-22701.
http://doi.org/10.1021/acs.iecr.9b04625.
[5] A. Astapov, B. Zhestkov, Y.S. Pogozhev, M. Zinovyeva, A.Y. Potanin, E. Levashov, The oxidation resistance of the heterophase ZrSi
2-MoSi
2-ZrB
2 powders–derived coatings, Corros. Sci. (2021) 109587.
http://doi.org/10.1016/j.corsci.2021.109587.
[6] L. Li, H. Li, Y. Li, X. Yin, Q. Shen, Q. Fu, A SiC-ZrB2-ZrC coating toughened by electrophoretically-deposited SiC nanowires to protect C/C composites against thermal shock and oxidation, Appl. Surf. Sci. 349 (2015) 465-471.
http://doi.org/10.1016/j.apsusc.2015.05.028.
[7] Q.-G. Fu, H.-J. Li, X.-H. Shi, K.-Z. Li, G.-D. Sun, Silicon carbide coating to protect carbon/carbon composites against oxidation, Scr. Mater. 52 (2005) 923-927.
http://doi.org/10.1016/j.scriptamat.2004.12.029.
[8] P. Wang, S. Zhou, P. Hu, G. Chen, X. Zhang, W. Han, Ablation resistance of ZrB
2SiC/SiC coating prepared by pack cementation for graphite, J. Alloys Compd. 682 (2016) 203-207.
http://doi.org/10.1016/j.jallcom.2016.04.010.
[9] C. Huo, L. Guo, L. Feng, C. Wang, Z. Li, Y. Zhang, G. Kou, Improving the oxidation resistance under thermal shock condition of SiC-coated C/C composites with refined SiC grain size using ferrocene, Surf. Coat. Technol. 316 (2017) 39-47.
http://doi.org/10.1016/j.surfcoat.2017.03.019.
[10] E. Goldstein, E. Carter, S. Kluz, The improvement of the oxidation resistance of graphite by composite technique, Carbon 4 (1966) 273-279.
http://doi.org/10.1016/0008-6223(66)90089-3.
[11] Y.-L. Zhang, H.-J. Li, X.-F. Qiang, K.-Z. Li, S.-Y. Zhang, C/SiC/MoSi
2–Si multilayer coatings for carbon/carbon composites for protection against oxidation, Corros. Sci. 53 (2011) 3840-3844.
http://doi.org/10.1016/j.corsci.2011.07.036.
[12] X. Yang, C. Zhao-hui, C. Feng, High-temperature protective coatings for C/SiC composites, J. Asian Ceram. Soc. 2 (2014) 305-309.
http://doi.org/10.1016/j.jascer.2014.07.004.
[13] A. Yurishcheva, A. Astapov, I. Lifanov, L. Rabinskiy, in: Key Engineering Materials, Trans Tech Publ, 2018, pp. 103-117.
http://doi.org/10.4028/www.scientific.net/kem.771.103.
[14] X. Yang, Q. Huang, Z. Su, L. Chai, X. Wang, L. Zhou, A double layer nanostructure SiC coating for anti-oxidation protection of carbon/carbon composites prepared by chemical vapor reaction and chemical vapor deposition, Ceram. Int. 39 (2013) 5053-5062.
http://doi.org/10.1016/j.ceramint.2012.11.104.
[15] N.S. Jacobson, D.J. Roth, R.W. Rauser, J.D. Cawley, D.M. Curry, Oxidation through coating cracks of SiC-protected carbon/carbon, Surf. Coat. Technol. 203 (2008) 372-383.
http://doi.org/10.1016/j.surfcoat.2008.09.013.
[16] I. Spitsberg, J. Steibel, Thermal and environmental barrier coatings for SiC/SiC CMCs in aircraft engine applications, Int. J. Appl. Ceram. Technol. 1 (2004) 291-301.
http://doi.org/10.1111/j.1744-7402.2004.tb00181.x.
[17] N.S. Jacobson, D.L. Myers, Active oxidation of SiC, Oxid. Met. 75 (2011) 1-25.
http://doi.org/10.1007/s11085-010-9216-4.
[18] H. Wu, H.-J. Li, C. Ma, Q.-G. Fu, Y.-J. Wang, J.-f. Wei, J. Tao, MoSi
2-based oxidation protective coatings for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying, J. Eur. Ceram. 30 (2010) 3267-3270.
http://doi.org/10.1016/j.jeurceramsoc.2010.06.007.
[19] H. Jian-Feng, Z. Xie-Rong, L. He-Jun, X. Xin-Bo, H. Min, Mullite-Al
2O
3-SiC oxidation protective coating for carbon/carbon composites, Carbon 41 (2003) 2825-2829.
http://doi.org/10.1016/s0008-6223(03)00397-x.
[20] T. Feng, H.-J. Li, X.-H. Shi, X. Yang, Y.-X. Li, X.-Y. Yao, Sealing role of B
2O
3 in MoSi
2–CrSi
2–Si/B-modified SiC coating for C/C composites, Corros. Sci. 60 (2012) 4-9.
http://doi.org/10.1016/j.corsci.2012.04.018.
[21] Q.-G. Fu, H.-J. Li, Y.-J. Wang, K.-Z. Li, X.-H. Shi, B2O3 modified SiC–MoSi
2 oxidation resistant coating for carbon/carbon composites by a two-step pack cementation, Corros. Sci. 51 (2009) 2450-2454.
http://doi.org/10.1016/j.corsci.2009.06.033.
[22] Y.-L. Zhang, H.-J. Li, Z.-X. Hu, J.-C. Ren, K.-Z. Li, Microstructure and oxidation resistance of Si–Mo–B coating for C/SiC coated carbon/carbon composites, Corros. Sci. 72 (2013) 150-155.
http://doi.org/10.1016/j.corsci.2013.03.015.
[23] H. Jian-Feng, Z. Xie-Rong, L. He-Jun, X. Xin-Bo, F. Ye-Wei, M. Huang, SiC/yttrium silicate multi-layer coating for oxidation protection of carbon/carbon composites, J. Mater. Sci. 39 (2004) 7383-7385.
http://doi.org/10.1023/b:jmsc.0000048756.96547.bf.
[24] J.-F. Huang, W. Hao, L.-Y. Cao, L.-X. Yin, H. Ouyang, C.-Y. Yao, J.-P. Wu, J. Fei, An AlPO
4/SiC coating prepared by pulse arc discharge deposition for oxidation protection of carbon/carbon composites, Corros. Sci. 79 (2014) 192-197.
http://doi.org/10.1016/j.corsci.2013.11.006.
[25] J. Yang, H. Liu, W. Gao, L. Su, K. Jiang, Effect of different fillers on the microstructural evolution and high temperature oxidation resistance of Mo-Si-B coatings prepared by pack cementation, Int. J. Refract. Hard Met. 100 (2021) 105625.
http://doi.org/10.1016/j.ijrmhm.2021.105625.
[26] N. Nomura, T. Suzuki, K. Yoshimi, S. Hanada, Microstructure and oxidation resistance of a plasma sprayed Mo–Si–B multiphase alloy coating, Intermetallics 11 (2003) 735-742.
http://doi.org/10.1016/s0966-9795(03)00069-4.
[27] P.V. Kiryukhantsev-Korneev, A. Sytchenko, A.Y. Potanin, S. Vorotilo, E. Levashov, Mechanical properties and oxidation resistance of Mo-Si-B and Mo-Hf-Si-B coatings obtained by magnetron sputtering in DC and pulsed DC modes, Surf. Coat. Technol. 403 (2020) 126373.
http://doi.org/10.1016/j.surfcoat.2020.126373.
[28] S. Cho, I. Jo, Y.-H. Lee, Y.W. Yoo, E. Byon, S.-K. Lee, S.-B. Lee, Highly improved oxidation resistance of TiC–SKD11 composite by SiC/TiB2 based hybrid coating, Appl. Surf. Sci. 448 (2018) 407-415.
http://doi.org/10.1016/j.apsusc.2018.04.156.
[29] T. Feng, H.-J. Li, Q.-G. Fu, X.-H. Shi, K.-Z. Li, Mo-Si-B alloys oxidation protective coating for SiC-coated carbon/carbon composites, Surf. Rev. Lett. 16 (2009) 223-229.
http://doi.org/10.1142/s0218625x09012524.
[30] M. Taylor, J. Perepezko, Hot corrosion of Mo–Si–B coatings, Oxid. Met. 87 (2017) 705-715.
http://doi.org/10.1007/s11085-017-9773-x.
[31] T.C. Totemeier, R.N. Wright, W.D. Swank, FeAl and Mo–Si–B intermetallic coatings prepared by thermal spraying, Intermetallics 12 (2004) 1335-1344.
http://doi.org/10.1016/j.intermet.2004.04.034.
[32] J. Pang, W. Wang, C. Zhou, Microstructure evolution and oxidation behavior of B modified MoSi
2 coating on Nb–Si based alloys, Corros. Sci. 105 (2016) 1-7.
http://doi.org/10.1016/j.corsci.2015.12.003.
[33] T. Ishigaki, X. Fan, Mo
5Si
3-B and MoSi
2 deposits fabricated by radio frequency induction plasma spraying, J. Therm. Spray Technol. 10 (2001) 611-617.
http://doi.org/10.1361/105996301770349132.
[34] م. عرفانمنش، س. ر. بخشی، سنتز و ارزیابی خواص پوششهای پاشش حرارتی MoSi2، پایاننامه دوره کارشناسی ارشد مهندسی مواد، دانشگاه صنعتی مالک اشتر، 1390.
[35] C. ASTM, 633-01: Standard test method for adhesion or cohesion strength of thermal spray coatings, ASTM International, West Conshohocken, PA (2008).
http://doi.org/10.1520/c0633-01r08.
[36] A. International, Standard test method for compositional analysis by thermogravimetry, ASTM International, 2003.
http://doi.org/10.1520/stp26395s.
[37] X. Fei, Y. Niu, H. Ji, L. Huang, X. Zheng, A comparative study of MoSi
2 coatings manufactured by atmospheric and vacuum plasma spray processes, Ceram. Int. 37 (2011) 813-817.
http://doi.org/10.1016/j.ceramint.2010.10.018.
[38] M. Erfanmanesh, S.R. Bakhshi, M. Khajelakzay, M. Salekbafghi, The effect of argon shielding gas at plasma spray process on the structure and properties of MoSi
2 coating, Ceram. Int. 40 (2014) 4529-4533.
http://doi.org/10.1016/j.ceramint.2013.08.128.
[39] M. Meyer, A. Thom, M. Akinc, Oxide scale formation and isothermal oxidation behavior of Mo–Si–B intermetallics at 600–1000 C, Intermetallics 7 (1999) 153-162.
http://doi.org/10.1016/s0966-9795(98)00058-2.
[40] T. Feng, H.-J. Li, Q.-G. Fu, X.-T. Shen, H. Wu, Microstructure and oxidation of multi-layer MoSi
2–CrSi
2–Si coatings for SiC coated carbon/carbon composites, Corros. Sci. 52 (2010) 3011-3017.
http://doi.org/10.1016/j.corsci.2010.05.020.
[41] T. Feng, H.-J. Li, S.-L. Wang, M.-H. Hu, L. Liu, Boron modified multi-layer MoSi
2–CrSi
2–SiC–Si oxidation protective coating for carbon/carbon composites, Ceram. Int. 40 (2014) 15167-15173.
http://doi.org/10.1016/j.ceramint.2014.06.131
