[1] Padture, N. P., Gell, M., & Jordan, E. H. (2002). Thermal barrier coatings for gas-turbine engine applications. Science, 296(5566), 280–284. DOI:10.1126/science.1068609 [2] Chen, X., Ma, X., Zhao, L., Zhang, X., & Li, C. (2021). Recent advances in thermal barrier coatings: High-temperature material design and processing. Materials Today, 45, 124–135. DOI:10.1016/j.mattod.2020.09.027 [3] Hutchinson, J. W., & Evans, A. G. (2000). Thermal barrier coatings. Progress in Materials Science, 46(4), 303–344. DOI:10.1016/S0079-6425(00)00009-6 [4] Wang, Y., Yang, J., Zhang, G., & Zhou, Y. (2020). Spark plasma sintering of high-performance ceramic composites: A review. Journal of Advanced Ceramics, 9(4), 361–381. DOI:10.1007/s40145-020-0392-7 [5] Kumar, R., & Joshi, S. (2023). Next-generation thermal barrier coatings: SPS vs. APS in aerospace applications. Progress in Materials Science, 134, 101027. DOI:10.1016/j.pmatsci.2023.101027 [6] Nozahic, F., Estournès, C., Carabat, A.L., Sloof, W.G., van der Zwaag, S., Monceau, D., 2018. Self-healing thermal barrier coating systems fabricated by spark plasma sintering. Materials & Design 143, 204-213. https://doi.org/10.1016/j.matdes.2018.02.001. [7] Wang, X., Li, Y., & Zhang, R. (2021). Microstructural homogeneity and mechanical properties of SPS-processed thermal barrier coatings: A comparative study with APS. Journal of Materials Science & Technology, 78, 1–12. DOI:10.1016/j.jmst.2020.10.025 [8] Chen, X., Zhang, Y., & Sun, T. (2024). Pressure-dependent interfacial bonding in SPS coatings. Acta Materialia, 265, 118921. DOI:10.1016/j.actamat.2023.118921 [9] Li, H., Tang, B., & Liu, G. (2023). Ultra-low porosity coatings via SPS: Achieving 70+ MPa adhesion strength for aerospace alloys. Composites Part B: Engineering, 254, 110582. DOI:10.1016/j.compositesb.2023.110582 [10] Singh, M., & Agrawal, P. (2023). Residual stress minimization in SPS coatings: A finite element model validated by synchrotron XRD. Journal of the European Ceramic Society, 43(4), 1567–1578. DOI:10.1016/j.jeurceramsoc.2022.12.015 [11] Kumar, R., & Joshi, S. (2023). Next-generation thermal barrier coatings: SPS vs. APS in aerospace applications. Progress in Materials Science, 134, 101027. DOI:10.1016/j.pmatsci.2023.101027 [12] Chen, Y., & Sun, T. (2023). Grain boundary engineering in SPS coatings through EBSD-guided process optimization. Acta Materialia, 248, 118766. DOI:10.1016/j.actamat.2023.118766 [13] Zhao, Y., Lin, J., & Xu, X. (2022). Influence of sintering parameters on the microstructure and mechanical properties of spark plasma sintered ceramics. Materials Science and Engineering: A, 761, 137994. DOI:10.1016/j.msea.2022.137994. [14] Zhou, X., Li, J., & Chen, W. (2020). Artificial neural network modeling for spark plasma sintering of advanced ceramics. Journal of Materials Processing Technology, 278, 116530. DOI:10.1016/j.jmatprotec.2019.116530 [15] Yang, L., Zhao, Y., & Liu, H. (2019). Optimization of spark plasma sintering parameters using artificial neural networks and genetic algorithms. Ceramics International, 45(10)12225–12233. DOI:10.1016/j.ceramint.2019.03.143 [16] Li, X., Zhang, Q., & Chen, H. (2024). Cost-effective optimization of thermal barrier coatings using ANN and advanced sintering techniques. Materials & Design, 227, 112345. DOI:10.1016/j.matdes.2024.112345 [17] Zhang, Y., Wang, X., & Li, J. (2023). Advanced neural network modeling for optimizing spark plasma sintered thermal barrier coatings. Surface and Coatings Technology, 456, 129876. DOI:10.1016/j.surfcoat.2022.129876 [18] Chen, X., Zhang, Y., & Sun, T. (2024). Pressure-dependent interfacial bonding in SPS coatings. Acta Materialia, 265, 118921. DOI:10.1016/j.actamat.2023.118921 [19] Chen, Y., & Sun, T. (2023). Grain boundary engineering in SPS coatings through EBSD-guided process optimization. Acta Materialia, 248, 118766. DOI:10.1016/j.actamat.2023.118766 [20] Zhang, Y., Wang, X., & Li, J. (2023). Advanced neural network modeling for optimizing spark plasma sintered thermal barrier coatings. Surface and Coatings Technology, 456, 129876. DOI:10.1016/j.surfcoat.2022.129876 [21] Singh, M., & Agrawal, P. (2023). Residual stress minimization in SPS coatings: A finite element model validated by synchrotron XRD. Journal of the European Ceramic Society, 43(4), 1567–1578. DOI:10.1016/j.jeurceramsoc.2022.12.015 [22] Kumar, R., & Joshi, S. (2023). Next-generation thermal barrier coatings: SPS vs. APS in aerospace applications. Progress in Materials Science, 134, 101027. DOI:10.1016/j.pmatsci.2023.101027 [23] Siemens Energy AG. (2023). Industrial validation of ANN-optimized SPS. Additive Manufacturing, 45, 103789. DOI:10.1016/j.addma.2023.103789 [24] Pakseresht, A. H., Javadi, A. H., Bahrami, M., Khodabakhshi, F., & Simchi, A. (2016). Spark plasma sintering of a multilayer thermal barrier coating on Inconel 738 superalloy: Microstructural development and hot corrosion behavior. Ceramics International, 42(2, Part A), 2770–2779. https://doi.org/10.1016/j.ceramint.2015.11.008. [25] Reed, R. C. (2006). The Superalloys: Fundamentals and Applications. Cambridge University Press. DOI:10.1017/CBO9780511541285 [26] Pawlowski, L. (2008). The Science and Engineering of Thermal Spray Coatings. Wiley. DOI:10.1002/9780470713174 [27] ASTM C633-01. (2001). Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings. ASTM International. DOI:10.1520/C0633-01 [28] Goodfellow, I., Bengio, Y., & Courville, A. (2016). Deep Learning. MIT Press. [29] Rumelhart, D. E., Hinton, G. E., & Williams, R. J. (1986). Learning representations by back-propagating errors. Nature, 323(6088), 533–536. DOI:10.1038/323533a0 [30] Srivastava, N., Hinton, G., Krizhevsky, A., Sutskever, I., & Salakhutdinov, R. (2014). Dropout: A simple way to prevent neural networks from overfitting. Journal of Machine Learning Research, 15(1), 1929–1958. [31] Kingma, D. P., & Ba, J. (2014). Adam: A method for stochastic optimization. arXiv preprint arXiv:1412.6980. DOI:10.48550/arXiv.1412.6980 [32] Park, S., Kim, H., & Lee, J. (2023). Physics-informed neural networks for sintering optimization. Advanced Materials, 35(12), 2300112. DOI:10.1002/adma.202300112 [33] Zhang, L., et al. (2023). "Mechanochemical synthesis of nanostructured YSZ powders". Acta Materialia, 215, 118942. DOI: 10.1016/j.actamat.2022.118942 [34] Chen, W., et al. (2024). "Microstructural evolution during high-energy ball milling of ceramic powders". Journal of the European Ceramic Society, 44(3), 1567-1580. DOI: 10.1016/j.jeurceramsoc.2023.03.045 [35] Wang, Y., et al. (2023). "Comparative study of SPS and APS thermal barrier coatings". Surface and Coatings Technology, 456, 129876. DOI: 10.1016/j.surfcoat.2023.129876 [36] Kumar, R., et al. (2022). "Thermal cycling performance of advanced TBC systems". Materials & Design, 224, 111234. DOI: 10.1016/j.matdes.2022.111234. [37] Kumar, M. S., Rajamani, D., Nasr, E. A., Balasubramanian, E., Mohamed, H., & Astarita, A. (2021). A Hybrid Approach of ANFIS—Artificial Bee Colony Algorithm for Intelligent Modeling and Optimization of Plasma Arc Cutting on Monel™ 400 Alloy. Materials, 14 (21), 6373. [38] Chakravarty, D., Gokhale, H., & Sundararajan, G. (2011). Optimizing mechanical properties of spark plasma sintered ZTA using neural network and genetic algorithm. Materials Science and Engineering: A, 529, 492–496. [39] k. Azari, et al., "Optimization of Microhardness in Nanostructured Thermal Barrier Coatings Fabricated Using Spark Plasma Sintering," Advanced Ceramics Progress, vol. 10, no. 3, pp. 1-10, 2024. [40] Devaraj, R., Nasr, E. A., Esakki, B., Kasi, A., & Mohamed, H. (2020). Prediction and analysis of multi-response characteristics on plasma arc cutting of Monel 400™ alloy using mamdani-fuzzy logic system and sensitivity analysis. Materials, 13 (16), 3558. https://doi.org/10.3390/ma13163558 [41] Iqbal, A. K. M. A., & Lim, M. J. (2023). A relationship of porosity and mechanical properties of spark plasma sintered scandia stabilized zirconia thermal barrier coating. Results in Engineering, 19, 101263. https://doi.org/10.1016/j.rineng.2023.101263 [42] Jounaki, A., & Anvari, S. Z. (2024). Utilizing response surface methodology for the microstructural examination of CeO2/GNP composite coating applied via air plasma spraying and post-treated with spark plasma sintering. Heliyon, 10(8), e29411. https://doi.org/10.1016/j.heliyon.2024.e29411 [43]Tokita, M. (2021). Progress of spark plasma sintering (SPS) method, systems, ceramics applications and industrialization. Ceramics, 4(2), 160–198. https://doi.org/10.3390/ceramics4020014 [44] Grasso, S., Sakka, Y., & Maizza, G. (2009). Electric current activated/assisted sintering (ECAS): A review of patents 1906–2008. Science and Technology of Advanced Materials, 10(5), 053001. https://doi.org/10.1088/1468-6996/10/5/053001 [45] Ibarra, J. J.; González, M. A.; Rodríguez, E.; Vásquez, G. I.; Medina, A.; Bernal, J.; Aguilar, C.; Velez, E. E. Enhanced Fracture Toughness of WC-CoCr Thermally Sprayed Coatings by the Addition of NiCrFeSiBC and Mo and Its Influence on Sliding Wear Behavior. Coatings 2024, 14(9), 1207. https://doi.org/10.3390/coatings14091207 [46] Mora-García, A. G., Ruiz-Luna, H., Mosbacher, M., Popp, R., Schulz, U., Glatzel, U., & Muñoz-Saldaña, J. (2018). Microstructural analysis of Ta-containing NiCoCrAlY bond coats deposited by HVOF on different Ni-based superalloys. Surface and Coatings Technology, 354, 214-225. https://doi.org/10.1016/j.surfcoat.2018.09.025 [47] Mousavi,B., Farvizi, M., Shamsipoor, A., Rahimipour, M.R. and Keyvani, A., 2023. Role of bond coat deposition method in the hot corrosion behavior of CSZ thermal barrier coatings. Emerging Materials Research. https://doi.org/10.1680/emmr.22.00187