1. Metals Handbook, Non-Ferrous Alloys, Vol.2, ASM, 9th ed., Ohio, 1988, pp.588-591.
2. T. W. Clyne and P. J. Withers, An Introduction to Metal Marix Composites", Cambridge University Press, (1993).
3. N. Chawla and K. K. Chawla, Metal matrix composites, Springer Science & Business, Media, Inc., (2006).
5. M. E. Smagorinski, P. G. Tsantrizos, S. Grenier, A. Cavasin, T. Brzezinski and G. Kim, The properties and microstructure of Al-based composites reinforced with ceramic particles, Materials Science and Engineering A, 244 (1998) 86–90.
6. E. Sicard, C. Boulmer-Leborgne and T. Sauvage, Excimer laser induced surface nitriding of aluminium alloy, Applied Surface Science, 127(1998)726-730.
7. S. Gredelj, A. R. Gerson, S. Kumar and G. P. Cavallaro, Inductively coupled plasma nitriding of aluminium, Applied Surface Science, 199(2002)183-194.
8. Y. Ando, S. Tobe, H. Tahara and T. Yoshikawa, Nitriding of aluminum by using supersonic expanding plasma jets, Vacuum, 65(2002)403-408.
9. M. Quast, P. Mayr and H. R. Stock, Plasma monitoring of plasma-assisted nitriding of aluminium alloys, Surface and Coatings Technology, 120(1999)244-249.
10. H. Y. Chen, H. R. Stock, P. Mayr, Plasma-assisted nitriding of aluminium", Surface and Coatings Technology, 64(1994)139-147.
11. D. F. Lii, J. L. Huang and S. T. Chang, The mechanical properties of AlN/Al composites manufactured by squeeze casting, European Ceramic Society, 22(2002)253–261.
12. S. Swaminathan, B. Srinivasa Rao and V. Jayaram, The production of AlN-rich matrix composites by the reactive infiltration of Al alloys in nitrogen", Acta Materialia, 50(2002)3093–3104.
13. R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara and A. K. Mukherjee, High strain rate superplasticity in a friction stir processed 7075 Al alloy, Scripta Materialia, 42(2000)163-168.
14. C. J. Hsu, P. W. Kao and N. J. Ho, Ultra fine-grained Al-Al2Cu composite produced in situ by friction stir processing", Scripta Materialia, 53(2005)341-345.
16. R. S. Mishra and Z. Y. Ma, Friction stir welding and processing, Materials Science and Engineering R, 50(2005)1-78.
17.
G. J. Fernandez and
L. E. Murr,
Characterization of tool wear and weld optimization in the friction stir welding of cast aluminum 359+20%SiC metal-matrix composite, Materials Characterization, 52(2004)65-75.
19. A. Shamsipur, S. F. Kashani-Bozorg and A. Zarei-Hanzaki, Production of in-situ hard Ti/TiN composite surface layers on CP-Ti using reactive friction stir processing under nitrogen environment, Surface and Coatings Technology, 218(2013)62-70.
20. B. X. Liu, X. Zhou and H. D. Li, Thermodynamics and growth kinetical consideration of metal‐nitride formation by nitrogen implantation, Physica Status Solidi (a), 113(1989)11-22.
21. حسین اسکندری، "رفتار تریبولوژیکی کامپوزیتهای زمینه آلومینیمی ذرهای تولید شده به روش فشردن انفجاری"، دانشگاه تهران، رساله دکتری، )1384(.
22. A. Shamsipur, S. F. Kashani-Bozorg and A. Zarei-Hanzaki, The effects of friction-stir process parameters on the fabrication of Ti/SiC nano-composite surface layer, Surface and Coatings Technology, 206(2011) 1372-1381.
23. A. Shamsipur, M. S. Pezeshki, S. A. Behmand and M. Rezaei, Improvement in surface specifications of AZ31B magnesium alloy by friction stir processing under nitrogen environment, 6(2018) 1-10.
24. A. Shamsipur, S. F. Kashani-Bozorg and A. Zarei-Hanzaki, Surface Modification of Titanium by Producing Ti/TiN Surface Composite Layers via FSP, Acta Metallurgica Sinica (English Letters), 30(2017) 550-557.
)